86571-3D000 / 86572-3D000 Moulding of Front Bumper for Hyundai Sonata ’03

Moulding of Front Bumper for Hyundai Sonata ’03: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Procurement Checklist

This moulding of front bumper is associated with Hyundai Sonata ’03. Treat 86571-3D000 / 86572-3D000 as an identification route, then validate the component at the actual mounting area. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Component Matching Record

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The procurement contact should capture upper edge alignment below the lamps, note overall corner curvature, and record side-retainer engagement before the carton is allocated. This route applies to the moulding of front bumper shown for Hyundai Sonata ’03.

If images accompany the enquiry, include a lower-retainer view, a fixing-point close-up, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with lower-retainer view to capture upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fixing-point close-up. Before the carton is allocated, note side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’03 vehicle record.

A workshop estimator should assess side-retainer engagement from a corner-profile view, then note overall corner curvature before the installation begins. The receiving technician should inspect upper edge alignment below the lamps from a side-profile photograph, then mark bracket and bolt-hole spacing before the commercial request is submitted. The service adviser should measure side-retainer engagement from a removed-part overview, then mark upper edge alignment below the lamps before the vehicle is dismantled. A vehicle inspector should inspect lamp or grille openings from a side-profile photograph, then mark overall corner curvature before the stock request is released.

Buyer Verification Notes

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 68 × 30 × 22CM / 50PCS; reconfirm current packing when freight is quoted.

Technical Comparison Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

Which vehicle is this component listed for?

The stated vehicle is Hyundai Sonata ’03. Treat that model label as one part of the fitment check, together with photographs and chassis details.

Which details help confirm the correct version?

Use the old component to check upper edge alignment below the lamps and bracket and bolt-hole spacing. Also state the installation side or position in the enquiry.

How can a trade buyer request pricing?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.