Fog Light for Hyundai Elantra ’14 / Elantra ’16

Fog Light for Hyundai Elantra ’14 / Elantra ’16: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the lighting inspection group.

Product Specifications

Inspection Route

This fog light is associated with Hyundai Elantra ’14 / Elantra ’16. Ask the workshop for VIN, mounting-area images and the old component when no OEM reference is available. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Replacement Selection Guide

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

The repair planner should cross-check electrical plug and pin layout, align mounting tabs around the housing, and review lens profile and outer edge before the packing plan is prepared. This route applies to the fog light shown for Hyundai Elantra ’14 / Elantra ’16.

If images accompany the enquiry, include a lower-retainer view, a vehicle-side photograph, and a fixing-point close-up. Label the evidence with the vehicle designation Hyundai Elantra ’14 / Elantra ’16 so the workshop and purchasing team review one configuration.

The repair planner can begin with lower-retainer view to cross-check electrical plug and pin layout. A second image should show left or right installation position from vehicle-side photograph. Before the packing plan is prepared, align lens profile and outer edge and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’14 / Elantra ’16 vehicle record.

The maintenance supervisor should mark lens profile and outer edge from a lower-retainer view, then measure left or right installation position before the carton is allocated. The parts coordinator should assess mounting tabs around the housing from an installation-opening picture, then assess mounting tabs around the housing before the repair schedule is finalized. The maintenance supervisor should mark left or right installation position from a vehicle-side photograph, then verify clearance beside bumper and grille before the installation begins. The stock controller should inspect lens profile and outer edge from a rear mounting view, then review left or right installation position before the replacement is test-positioned.

Buyer Verification Notes

Place old and replacement components side by side, then review every fixing point before installation. Recorded packing is 76 × 48 × 53CM / 10PCS; reconfirm current packing when freight is quoted.

Vehicle-Side Evidence

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What model is associated with this replacement part?

Application information points to Hyundai Elantra ’14 / Elantra ’16. A workshop should still compare the removed item and mounting location before ordering.

What should be compared with the removed component?

Review electrical plug and pin layout first, then inspect left or right installation position on the vehicle. Clear photographs help the supplier assess the required version.

How can a trade buyer request pricing?

A complete sourcing request names the quantity, delivery market and the comparison information used. Add vehicle details so availability and packing can be checked against the requested version.