92101-3X010 / 92102-3X010 Headlight Assembly(Manual) for Hyundai Elantra ’07 / Elantra ’11

Headlight Assembly(Manual) for Hyundai Elantra ’07 / Elantra ’11: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Vehicle-Side Evidence

This headlight assembly(manual) is associated with Hyundai Elantra ’07 / Elantra ’11. The OEM entry 92101-3X010 / 92102-3X010 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The receiving technician should cross-check mounting tabs around the housing, document left or right installation position, and review electrical plug and pin layout before the carton is allocated. This route applies to the headlight assembly(manual) shown for Hyundai Elantra ’07 / Elantra ’11.

If images accompany the enquiry, include a connector close-up, a connector close-up, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with connector close-up to cross-check mounting tabs around the housing. A second image should show clearance beside bumper and grille from connector close-up. Before the carton is allocated, document electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’07 / Elantra ’11 vehicle record.

A vehicle inspector should compare lens profile and outer edge from an upper-edge image, then capture clearance beside bumper and grille before the stock request is released. The receiving technician should verify left or right installation position from a rear mounting view, then evaluate left or right installation position before the installation begins. A body-shop buyer should measure clearance beside bumper and grille from a removed-part overview, then note left or right installation position before the purchase order is issued. The repair planner should trace lens profile and outer edge from a removed-part overview, then inspect lens profile and outer edge before the purchase order is issued.

Procurement Checklist

Support long or flexible parts evenly during trial fitting so their natural outline can be judged. Recorded packing is 68 × 53 × 46CM / 4PCS; reconfirm current packing when freight is quoted.

Commercial Request Details

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

The recorded application is Hyundai Elantra ’07 / Elantra ’11. Confirm trim, market specification and the removed headlight assembly(manual) before purchase.

Which details help confirm the correct version?

Use the old component to check mounting tabs around the housing and clearance beside bumper and grille. Also state the installation side or position in the enquiry.

Which details help prepare shipping terms?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Packing and freight can be discussed after the component version has been identified.