86350-1R000 Grille for Hyundai Accent ’11

Grille for Hyundai Accent ’11: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the grille inspection group.

Product Specifications

Inspection Route

This grille is associated with Hyundai Accent ’11. An OEM match to 86350-1R000 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Component Matching Record

• Clearance beside the lamps
• Outer perimeter shape
• Upper tab positions
• Lower clip arrangement
• Mesh or slat pattern

The repair planner should trace clearance beside the lamps, record outer perimeter shape, and record mesh or slat pattern before the delivery plan is confirmed. This route applies to the grille shown for Hyundai Accent ’11.

If images accompany the enquiry, include a chassis-plate image, an underside image, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with chassis-plate image to trace clearance beside the lamps. A second image should show upper tab positions from underside image. Before the delivery plan is confirmed, record mesh or slat pattern and note any difference from the removed component. Keep these observations with the Hyundai Accent ’11 vehicle record.

The procurement contact should capture lower clip arrangement from a fixing-point close-up, then confirm upper tab positions before the packing plan is prepared. The maintenance supervisor should document mesh or slat pattern from a side-profile photograph, then inspect lower clip arrangement before the replacement is test-positioned. The importing distributor should trace clearance beside the lamps from an upper-edge image, then document outer perimeter shape before the stock request is released. A workshop estimator should photograph clearance beside the lamps from a connector close-up, then mark mesh or slat pattern before the commercial request is submitted.

Application Review

Photograph the original arrangement before removal when several brackets or connectors are involved. Recorded packing is 111 × 49 × 29CM / 10PCS; reconfirm current packing when freight is quoted.

Installation Planning

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which vehicle record belongs with this product?

This grille appears under Hyundai Accent ’11. Review the exact vehicle version rather than relying on the model name by itself.

How can an incorrect order be avoided?

Check clearance beside the lamps, confirm upper tab positions, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.