86630-1E000 Rear Bumper Support(Steel) for Hyundai Accent ’06

Rear Bumper Support(Steel) for Hyundai Accent ’06: A reliable quotation starts with a clear component description and physical comparison evidence. The component belongs to the bumper inspection group.

Product Specifications

Buyer Verification Notes

This rear bumper support(steel) is associated with Hyundai Accent ’06. The numbers 86630-1E000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The parts coordinator should verify side-retainer engagement, cross-check upper edge alignment below the lamps, and assess lamp or grille openings before the commercial request is submitted. This route applies to the rear bumper support(steel) shown for Hyundai Accent ’06.

If images accompany the enquiry, include a fixing-point close-up, a chassis-plate image, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with fixing-point close-up to verify side-retainer engagement. A second image should show overall corner curvature from chassis-plate image. Before the commercial request is submitted, cross-check lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Accent ’06 vehicle record.

The stock controller should confirm lamp or grille openings from an adjacent-panel image, then compare lamp or grille openings before the replacement is test-positioned. A vehicle inspector should align upper edge alignment below the lamps from an underside image, then capture side-retainer engagement before the purchase order is issued. A collision-repair specialist should measure side-retainer engagement from a fastener detail, then inspect overall corner curvature before the purchase order is issued. A vehicle inspector should confirm overall corner curvature from a side-profile photograph, then compare overall corner curvature before the vehicle is dismantled.

Technical Comparison Notes

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 120 × 13 × 17CM / 1PCS; reconfirm current packing when freight is quoted.

Inspection Route

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What is the listed vehicle application?

This rear bumper support(steel) appears under Hyundai Accent ’06. Review the exact vehicle version rather than relying on the model name by itself.

How should fitment be checked before ordering?

Review side-retainer engagement first, then inspect overall corner curvature on the vehicle. Clear photographs help the supplier assess the required version.

How can a trade buyer request pricing?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Include clear original-part photographs when the exact configuration needs further review.