Underbody Shield for Jeep Grand Commander K8 2018-2021 – LH / RH
- Elongated panels have stepped edges and several lengthwise channels.
- Round fixing points sit in raised or recessed pads, with smaller square openings near the perimeter.
- Left and right references are distinct; specify the required side rather than assuming both photographed panels are supplied.
Long Panels with Stepped Edges
The photograph shows two elongated underbody shield shapes. Their faces carry long channels, shorter ribs and distributed fixing pads. The edges widen and narrow around different cut-outs rather than forming a simple rectangular strip.
Use the perimeter shape to identify the required side, then compare each fixing position with the removed panel. The placement of the channels alone is not enough to establish that one side can replace the other.
Left and Right References
For Jeep Grand Commander K8 2018-2021, the references are 53365365 LH / 53365364 RH. State the side needed and confirm the quantity in the quotation. Two panels in the image do not by themselves indicate a paired set.
Is this the large engine underbody shield?
These are the elongated underbody panels shown. Identify the damaged area and outline before selecting them in place of a wider engine shield.
Do the fixing points indicate supplied hardware?
No. Their shape is useful for matching, but bolts, clips and other mounting pieces must be confirmed separately.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
