Rear Bumper – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2
- Vehicle group shown in the catalog: BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2; check the specific match
- OE information accompanying the listing: Available on Request
- Confirm how the wheel-arch meeting points compares with the old item
- Verify the supplied item before carrying out permanent finishing work
- Photograph the mounting area before the old item is removed
- Confirm the individual item before discussing final transport charges
- Review the rear fastening areas, then clarify the corner shape
- Keep a clear view of the entire rear bumper with the enquiry
- Request shipping dimensions after confirming the item and volume
Select the Actual Vehicle
Look for this rear bumper in the BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2 catalog grouping. The group alone does not establish compatibility; use vehicle-specific information and an original-part comparison for selection.
Number Information
The displayed OE information is Available on Request. If the original has a readable reference, include a close photograph with the part-identification enquiry.
Inspecting the Original
Identify the required bumper section and its position. Where upper and lower pieces are separate, compare the joint with the adjoining section.
Features to Compare
Inspect the corner shape without altering either item. Resolve the rear fastening areas and wheel-arch meeting points against the vehicle before approving the comparison.
Photographic Details
A measured feature should be photographed with its reference points visible. State the units so that the same dimension can be checked on the proposed replacement.
Arrival and Condition
Photograph the unpacked part from the same general angles used in the enquiry. Use those images to report any mismatch with the agreed supply.
Quotation Requirements
Use the comparison images and final item details to make the purchase requirement clear. Request the final number of cartons and their measurements for transport arrangements.
Selection and Supply Questions
What is needed beyond the catalog heading?
Provide the model and production information for the vehicle needing the part. Check the individual item against that vehicle's existing arrangement.
How can similar-looking parts be distinguished?
The wheel-arch meeting points, corner shape and rear fastening areas are useful reference points. Keep the original item correctly oriented when recording those details.
What follows the part-identification check?
Provide the confirmed configuration, units required and receiving country. Ask for availability and the shipment details relevant to that order.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
