Grille for ISUZU D-max Tfr ’18 / D-max Tfr ’21
- The application evidence names ISUZU D-max Tfr '18 / D-max Tfr '21
- Ask for stock and commercial terms only after the pictured version is confirmed
- Ask for updated packing details after technical verification
- Measure housing depth where a visual check is not conclusive
- Check the front and reverse views for differences in connector interface
- Identification must rely on the pictured part because the OE cell is empty
- Keep the carton until connector interface and the complete outline are accepted
- Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this grille, connector interface and the surrounding mounting area
- Keep a vehicle identification image with the part comparison images
The pictured grille is associated with ISUZU D-max Tfr '18 / D-max Tfr '21. Confirm the vehicle, part geometry and required position together.
Version Comparison
Use close-up images for connector interface and housing depth. A wider vehicle-side view should show surrounding clearance and surrounding clearance.
Technical Evidence File
Keep the supporting material with the enquiry: the full ISUZU D-max Tfr '18 / D-max Tfr '21 designation from the vehicle record; a reverse-side photograph covering housing depth; a record of any connector, guide or bracket difference; a damage record if a mounting point or visible edge is affected; a ruler reference beside any uncertain mounting distance.
Preparation Prior to Installation
Use the vehicle opening and removed part as references. Resolve every difference in surrounding clearance prior to permanent installation.
Comparison Checklist
- Check that connector interface aligns naturally prior to tightening.
- Inspect visible edges and surface condition.
- Compare connector interface with the removed ISUZU D-max Tfr '18 / D-max Tfr '21 part.
- Document the required installation side when applicable.
- Verify access around adjacent parts.
- Compare the outside contour under matching camera angles.
Delivery Inspection
Prior to shelving the item, verify the required side and inspect housing depth. Keep protective material in place until acceptance.
ISUZU Application Evidence
Link images of connector interface and housing depth to the ISUZU D-max Tfr '18 / D-max Tfr '21 chassis or vehicle record for this grille. Purchasing should wait until surrounding clearance agrees with the removed part.
B2B Request Details
Include the intended side, vehicle market and purchase quantity in the B2B enquiry. Confirm carton size and quantity per carton prior to freight calculation.
Vehicle Record Check
Treat ISUZU D-max Tfr '18 / D-max Tfr '21 as the source application, then confirm production and market details from the actual vehicle.
Verification Path
Use a three-stage decision: vehicle evidence, part evidence and commercial evidence. The grille should pass each stage prior to ordering.
Packing Confirmation
The source provides no packing value. Confirm export protection and carton count during commercial review.
Product Identification
The ISUZU source sheet names Grille as the part and ISUZU D-max Tfr '18 / D-max Tfr '21 as its application. Both fields should remain together during review.
OE Data Rule
The ISUZU source sheet leaves the OE field empty. Store an empty metadata value and show Available on Request. Do not derive a number from a title, filename, model year or neighboring row.
Buyer Questions
What belongs in a quotation request?
Include the full application, needed position, order volume, receiving country and comparison images.
How should a trial fit be performed?
Use light locator engagement only; never force the grille into a conflicting opening.
What physical details need comparison?
Review connector interface, housing depth and surrounding clearance against the removed part prior to verification.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
