Tail Light Assembly for NISSAN Logan ’04 – Version D
- Begin Tail Light Assembly selection with a direct mounting-interface comparison
- Check Tail Light Assembly orientation before side selection
- Confirm mounting tabs, then verify the Tail Light Assembly outer edge
- Use installed position to distinguish the NISSAN Logan '04 tail light assembly version
- Review the NISSAN Logan '04 opening before approving Tail Light Assembly
- Confirm the NISSAN Logan '04 tail light assembly front, rear, left or right position where applicable
- Validate the tail light assembly outline associated with Tail Light Assembly
- Match Tail Light Assembly to the removed sample at every fixing point
- Provide installed, reverse-side and tail light assembly fixing-point photographs
The pictured item is a tail light assembly associated with NISSAN Logan '04. Final selection depends on a physical and automobile-side comparison.
NISSAN Product Data
| Part | Tail Light Assembly |
|---|---|
| OEM replacement reference | Not confirmed in source data |
| Automobile designation | NISSAN Logan '04 |
| Inspection family | Lighting |
| Design checkpoint | mounting tabs |
| Car-side checkpoint | installed position |
| Supply format | B2B replacement-parts enquiry |
Model and Reference Confirmation
Without a confirmed number, document installed position and the complete reverse side.
Record the full NISSAN Logan '04 designation and production information ahead of comparing the pictured variant.
Physical Identification
Use installed position to separate versions that may appear similar in a front-view image. Measure fastener spacing and the tail light assembly outer shape for market-variant checking. Verify fixing tabs during a dry fit.
- mounting tabs
- fastener spacing
- installed position
Car-Side Inspection
Place the tail light assembly loosely in position ahead of engaging every fastener. Validate even alignment and clearance around the adjacent panels. Resolve any discrepancy in installed position prior to permanent assembly.
Quotation Preparation
Send the automobile vehicle designation, needed position, order volume and destination. Add a vehicle-side image and a close view of fastener spacing. Confirm export packing after the required quantity is known.
Buyer Comparison Checklist
- Confirm the photographed design before calculating freight.
- Measure the surrounding gap after loose placement of the tail light assembly.
- Add quantity and receiving country in the commercial request.
- Do not force the Tail Light Assembly design into a mismatched opening.
- Ask for packing data after approving the tail light assembly.
- Verify brackets and guides for damage ahead of installation.
- Review the outer contour under similar camera angles.
- Request another view if installed position is not visible.
Frequently Asked Questions
What NISSAN model association is recorded?
The listed vehicle designation is NISSAN Logan '04. Verify it against the car and existing part.
What distinguishes the intended configuration?
Review fixing tabs, fastener spacing and installed position ahead of decision.
What information supports a quotation?
Provide the fitment, reference when available, selected quantity, destination and comparison photos.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
