Tail Light Assembly for SUZUKI Swift-Sx4 ’11 / Jimny ’01 / Wagon R ’04-’06 / Focus ’05 – Version C
- Check whether Tail Light Assembly matches the photographed SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 construction
- Use Tail Light Assembly only after connector and mounts agree
- Compare mounting tabs while reviewing the Tail Light Assembly configuration
- Measure the tail light assembly mounting tabs with clear close-up photographs
- Ask the workshop to compare Tail Light Assembly without modifying brackets
- Inspect fastener spacing before preparing a quotation for Tail Light Assembly
- State quantity and destination for the SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 B2B enquiry
- Confirm the SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 tail light assembly front, rear, left or right position where applicable
- Validate the tail light assembly outline associated with Tail Light Assembly
For SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05, this page presents a tail light assembly for replacement-parts sourcing. Verify the visible version ahead of placing an order.
SUZUKI Product Data
| Part | Tail Light Assembly |
|---|---|
| OEM replacement reference | Not confirmed in source data |
| Car designation | SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 |
| Inspection family | Lighting |
| Design checkpoint | mounting tabs |
| Car-side checkpoint | installed position |
| Supply format | B2B replacement-parts enquiry |
Automobile Application Review
No verified OEM reference is shown, so begin with mounting tabs and the original assembly.
Record the full SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 designation and production information ahead of comparing the pictured version.
Component Comparison Points
Use installed position to separate versions that may appear similar in a front-view image. Inspect attachment tabs with clear close-up views. Document fastener spacing and the tail light assembly outer shape for technical approval.
- attachment tabs
- fastener spacing
- installed position
Installation and Position Inspect
Begin with a dry fit of the tail light assembly and use only the primary locators. Validate even alignment and clearance around the adjacent panels. Request another configuration when the attachment geometry does not agree.
B2B Enquiry Data
Add SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05, quantity and receiving market in the availability request. Add a vehicle-side photograph and a close view of fastener spacing. Request updated packing data with the stock quotation.
Buyer Comparison Checklist
- Verify installed position at the SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 installation opening.
- Document the intended installation side when it applies.
- Examine the tail light assembly finish and visible edge condition.
- Image fastener spacing from a direction showing the complete tail light assembly interface.
- Use the Tail Light Assembly reference together with a reverse-side image.
- Examine the tail light assembly installation tabs with the removed SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05 item.
- Validate the photographed configuration before calculating freight.
- Inspect that fixing tabs aligns naturally before tightening fasteners.
Frequently Asked Questions
What SUZUKI fitment is recorded?
The listed model association is SUZUKI Swift-Sx4 '11 / Jimny '01 / Wagon R '04-'06 / Focus '05. Confirm it against the vehicle and removed component.
Which information need a physical comparison?
Review fixing tabs, fastener spacing and installed position ahead of decision.
What belongs in a B2B enquiry?
Provide the fitment, reference when available, selected quantity, destination and comparison photos.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
