Front Bumper for SUZUKI Alto / Alto ’06 / Alto ’09 – Version B
- Include Front Bumper in the technical approval request
- SUZUKI Alto / Alto '06 / Alto '09 Front Bumper OEM number is not confirmed; use physical comparison
- Match Front Bumper to the removed sample at every fixing point
- Inspect the front bumper reverse face before accepting Front Bumper
- Provide installed, reverse-side and front bumper fixing-point photographs
- Use Front Bumper only after connector and mounts agree
- Confirm Front Bumper clearances beside surrounding components
- Check whether Front Bumper matches the photographed SUZUKI Alto / Alto '06 / Alto '09 construction
- Use SUZUKI Alto / Alto '06 / Alto '09 production details to review Front Bumper
The pictured component is a front bumper associated with SUZUKI Alto / Alto '06 / Alto '09. Final decision depends on a physical and automobile-side comparison.
SUZUKI Product Data
| Component | Front Bumper |
|---|---|
| OEM replacement reference | Not confirmed in source data |
| Car designation | SUZUKI Alto / Alto '06 / Alto '09 |
| Inspection family | Bumper and Trim |
| Configuration checkpoint | attachment points |
| Car-side checkpoint | adjacent panel gap |
| Supply format | B2B replacement-parts enquiry |
SUZUKI Fitment Examine
No verified OEM reference is shown, so begin with attachment points and the vehicle-side item.
Record the full SUZUKI Alto / Alto '06 / Alto '09 designation and production information before comparing the pictured configuration.
Piece Comparison Points
Use adjacent panel gap to separate versions that may appear similar in a front-view image. Inspect guide slots and the front bumper outer shape for fitment review. Inspect attachment points against the removed component.
- attachment points
- guide slots
- adjacent panel gap
Fixing and Position Examine
Place the front bumper loosely in position ahead of engaging every fastener. Verify nearby movement and service access while reviewing guide slots. Stop if attachment points differs from the existing item.
Commercial Order Information
Send the car fitment, intended position, order volume and destination. Supply front, rear and fixing-point images for technical confirmation. The source packing note is 147*36*25CM/5PCS; reconfirm it for the quoted shipment.
Buyer Comparison Checklist
- Verify brackets and guides for damage ahead of installation.
- Validate adjacent panel gap at the SUZUKI Alto / Alto '06 / Alto '09 installation opening.
- Photograph guide slots from a direction showing the complete front bumper interface.
- Retain the vehicle-side item until guide slots is verified.
- Ask for packing data after approving the front bumper.
- Use the Front Bumper reference together with a reverse-side photograph.
- Use fixing-point close-ups to support front bumper selection.
- Verify connector access and nearby movement for SUZUKI Alto / Alto '06 / Alto '09.
Frequently Asked Questions
What SUZUKI vehicle designation is recorded?
The listed application is SUZUKI Alto / Alto '06 / Alto '09. Confirm it against the vehicle and removed component.
Which information need a physical comparison?
Review attachment points, guide slots and adjacent panel gap prior to selection.
How should an availability request be prepared?
Send the application, reference when available, needed quantity, destination and comparison photographs.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
