Front Bumper for SUZUKI Pronto ’99-’03 / St90 Pick-up/van Sj 410 Jeep
- Validate the front bumper outline associated with Front Bumper
- Treat Front Bumper as a cross-reference, not the only fitment test
- Do a loose trial placement before releasing the Front Bumper order
- Use SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep production details to review Front Bumper
- Confirm the SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep front bumper front, rear, left or right position where applicable
- Match Front Bumper to the removed sample at every fixing point
- Component under review: Front Bumper
- Supply clear fixing-point evidence for the Front Bumper enquiry
- Record reverse-side ribs when checking the SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep Front Bumper option
Shown here is a front bumper linked to SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep. Inspect the identifiers, attachment information and selected position as one review.
SUZUKI Product Data
| Component | Front Bumper |
|---|---|
| OEM replacement reference | Not confirmed in source data |
| Car designation | SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep |
| Inspection family | Bumper and Trim |
| Version checkpoint | retaining clips |
| Car-side checkpoint | edge alignment |
| Supply format | B2B replacement-parts enquiry |
Application and Reference Inspect
Identification should rely on reverse-side ribs, images and vehicle data because no OEM reference is confirmed.
Check that the automobile is identified as SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep and photograph the vehicle-side installation area.
Visible Construction Inspect
Validate retaining clips with the vehicle identification data. Use edge alignment to separate versions that may appear similar in a front-view image. Inspect reverse-side ribs and the front bumper outer shape for side confirmation.
- retaining clips
- reverse-side ribs
- edge alignment
Installation Preparation
Place the front bumper loosely in position before engaging every fastener. Validate even alignment and clearance around the adjacent panels. Request another configuration when the attachment geometry does not agree.
Quotation Preparation
Prepare the enquiry with fitment details, side, quantity and delivery country. Supply front, rear and fixing-point images for technical confirmation. The source packing note is 152*54*53CM/5PCS; reconfirm it for the quoted shipment.
Buyer Comparison Checklist
- Verify brackets and guides for damage before installation.
- Review the outer contour under similar camera angles.
- Measure the surrounding gap after loose placement of the front bumper.
- Document the selected installation side when it applies.
- Request another view if edge alignment is not visible.
- Photograph reverse-side ribs from a direction showing the complete front bumper interface.
- Add quantity and receiving country in the commercial request.
- Review the front bumper finish and visible edge condition.
Frequently Asked Questions
Which vehicle is associated with this assembly?
The listed vehicle designation is SUZUKI Pronto '99-'03 / St90 Pick-up/van Sj 410 Jeep. Validate it against the vehicle and vehicle-side item.
Which records need a physical comparison?
Match retaining clips, reverse-side ribs and edge alignment prior to approval.
What belongs in a B2B enquiry?
Send the application, reference when available, needed quantity, destination and comparison photographs.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
