Headlight Assembly for KIA K3’19 / K3’19 GT 5D / K3 ’21
- KIA application: K3'19 / K3'19 GT 5D / K3 '21
- Use KIA K3'19 / K3'19 GT 5D / K3 '21 production details to review Headlight Assembly
- Supply clear fixing-point evidence for the Headlight Assembly enquiry
- Keep Headlight Assembly with the vehicle identification photograph
- Photograph Headlight Assembly from front and reverse directions
- Do not finalize KIA K3'19 / K3'19 GT 5D / K3 '21 headlight assembly fitment until retaining clips and edge alignment agree
- Check whether Headlight Assembly matches the photographed KIA K3'19 / K3'19 GT 5D / K3 '21 construction
- Provide installed, reverse-side and headlight assembly fixing-point photographs
- Treat Headlight Assembly as a cross-reference, not the only fitment test
The pictured part is a headlight assembly associated with KIA K3'19 / K3'19 GT 5D / K3 '21. Final approval depends on a physical and vehicle-side comparison.
KIA Product Data
| Assembly | Headlight Assembly |
|---|---|
| OEM replacement reference | Not confirmed in source data |
| Automobile designation | KIA K3'19 / K3'19 GT 5D / K3 '21 |
| Inspection family | Lighting |
| Version checkpoint | retaining clips |
| Car-side checkpoint | edge alignment |
| Supply format | B2B replacement-parts enquiry |
Application and Reference Inspect
No verified OEM reference is shown, so begin with retaining clips and the existing part.
Record the full KIA K3'19 / K3'19 GT 5D / K3 '21 designation and production information ahead of comparing the pictured variant.
Physical Identification
Use edge alignment to separate versions that may appear similar in a front-view image. Inspect retaining clips prior to ordering. Inspect reverse-side ribs and the headlight assembly outer shape for purchase-order release.
- retaining clips
- reverse-side ribs
- edge alignment
Vehicle-Side Inspection
Begin with a dry fit of the headlight assembly and use only the primary locators. Confirm even alignment and clearance around the adjacent panels. Stop if retaining clips differs from the vehicle-side component.
Supply and Packing Request
Include KIA K3'19 / K3'19 GT 5D / K3 '21, quantity and receiving market in the availability request. Add a automobile-side picture and a close view of reverse-side ribs. The source packing note is 81.5*26*25/1PC; reconfirm it for the quoted shipment.
Buyer Comparison Checklist
- Measure the surrounding gap after loose placement of the headlight assembly.
- Do not force the Headlight Assembly configuration into a mismatched opening.
- Keep automobile production information with the Headlight Assembly enquiry.
- Document the required installation side when it applies.
- Assess the headlight assembly finish and visible edge condition.
- Supply quantity and receiving country in the commercial request.
- Examine the headlight assembly retaining clips with the removed KIA K3'19 / K3'19 GT 5D / K3 '21 part.
- Approve KIA K3'19 / K3'19 GT 5D / K3 '21 only after a physical comparison.
Frequently Asked Questions
Which vehicle is associated with this assembly?
The listed vehicle designation is KIA K3'19 / K3'19 GT 5D / K3 '21. Verify it against the car and existing part.
What distinguishes the intended configuration?
Review retaining clips, reverse-side ribs and edge alignment prior to selection.
How should an availability request be prepared?
Send the application, reference when available, needed quantity, destination and comparison photographs.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
