86511-A7000 Front Bumper for KIA K3 ’13 / K3 ’16
- Review the KIA K3 '13 / K3 '16 opening before approving 86511-A7000
- Provide installed, reverse-side and front bumper fixing-point photographs
- Compare retaining clips while reviewing the 86511-A7000 configuration
- State quantity and destination for the KIA K3 '13 / K3 '16 B2B enquiry
- Check 86511-A7000 orientation before side selection
- Use a vehicle-side image to confirm 86511-A7000 and edge alignment
- Supply clear fixing-point evidence for the 86511-A7000 enquiry
- KIA K3 '13 / K3 '16 Front Bumper reference numbers: 86511-A7000
- Check KIA K3 '13 / K3 '16 reverse-side ribs for technical approval
Shown here is a front bumper linked to KIA K3 '13 / K3 '16. Assess the identifiers, installation records and required position as one inspect.
KIA Product Data
| Item | Front Bumper |
|---|---|
| OEM replacement reference | 86511-A7000 |
| Automobile designation | KIA K3 '13 / K3 '16 |
| Inspection family | Bumper and Trim |
| Design checkpoint | retaining clips |
| Automobile-side checkpoint | edge alignment |
| Supply format | B2B replacement-parts enquiry |
Model and Reference Confirmation
Use 86511-A7000 as the written cross-reference, then confirm retaining clips on the actual piece.
Market and production differences can exist within KIA K3 '13 / K3 '16, so supply car identification evidence.
Physical Identification
Use edge alignment to separate versions that may appear similar in a front-view image. Verify retaining clips with clear close-up photos. Examine reverse-side ribs and the front bumper outer shape for quotation preparation.
- retaining clips
- reverse-side ribs
- edge alignment
Workshop Fitment Procedure
Begin with a dry fit of the front bumper and use only the primary locators. Check even alignment and clearance around the adjacent panels. Resolve any discrepancy in edge alignment prior to permanent assembly.
Quotation Preparation
Send the automobile application, selected position, order volume and destination. Add a vehicle-side picture and a close view of reverse-side ribs. The source packing note is 200*35*55CM/5PCS; reconfirm it for the quoted shipment.
Buyer Comparison Checklist
- Supply quantity and receiving country in the commercial request.
- Use the 86511-A7000 reference together with a reverse-side picture.
- Examine the front bumper finish and visible edge condition.
- Review that retaining clips aligns naturally prior to tightening fasteners.
- Check brackets and guides for damage prior to installation.
- Verify connector access and nearby movement for KIA K3 '13 / K3 '16.
- Approve KIA K3 '13 / K3 '16 only after a physical comparison.
- Compare the outer contour under similar camera angles.
Frequently Asked Questions
What KIA model association is recorded?
The listed vehicle designation is KIA K3 '13 / K3 '16. Confirm it against the car and removed component.
What distinguishes the selected configuration?
Examine retaining clips, reverse-side ribs and edge alignment prior to decision.
What information supports a quotation?
Provide the fitment, reference when available, selected quantity, destination and comparison photos.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
