Fog Light Version A for Daewoo Trax ‘2017 / Ssangyong / N300

Fog Light Version A for Daewoo Trax ‘2017 / Ssangyong / N300: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the lighting inspection group.

Product Specifications

Buyer Verification Notes

This fog light version a is associated with Daewoo Trax ‘2017 / Ssangyong / N300. This page does not assign a replacement number where none is supplied; visual checks remain necessary. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The maintenance supervisor should document left or right installation position, align clearance beside bumper and grille, and cross-check mounting tabs around the housing before the replacement is test-positioned. This route applies to the fog light version a shown for Daewoo Trax ‘2017 / Ssangyong / N300.

If images accompany the enquiry, include a lower-retainer view, an adjacent-panel image, and a connector close-up. Label the evidence with the vehicle designation Daewoo Trax ‘2017 / Ssangyong / N300 so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with lower-retainer view to document left or right installation position. A second image should show lens profile and outer edge from adjacent-panel image. Before the replacement is test-positioned, align mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Trax ‘2017 / Ssangyong / N300 vehicle record.

The maintenance supervisor should trace electrical plug and pin layout from a side-profile photograph, then align clearance beside bumper and grille before the carton is allocated. A body-shop buyer should photograph clearance beside bumper and grille from an underside image, then cross-check electrical plug and pin layout before the fitment decision is signed off. A collision-repair specialist should cross-check mounting tabs around the housing from a full component outline, then measure clearance beside bumper and grille before the quotation is approved. The stock controller should photograph electrical plug and pin layout from an adjacent-panel image, then mark lens profile and outer edge before the vehicle is dismantled.

Inspection Route

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. Recorded packing is 83 × 49 × 53CM / 40PCS; reconfirm current packing when freight is quoted.

Configuration Check

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which Daewoo model does this page cover?

Application information points to Daewoo Trax ‘2017 / Ssangyong / N300. A workshop should still compare the removed item and mounting location before ordering.

How is the pictured version best verified?

Photograph left or right installation position and the mounting area around lens profile and outer edge. Combine those images with vehicle identification data for review.

How can a trade buyer request pricing?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Providing the vehicle record at the start reduces follow-up questions during quotation.