Tail Light Assembly Version A for Daewoo Trax ‘2017 / Ssangyong / N300

Tail Light Assembly Version A for Daewoo Trax ‘2017 / Ssangyong / N300: The following information supports a structured pre-order check for trade buyers. The component belongs to the lighting inspection group.

Product Specifications

Part Recognition Guide

This tail light assembly version a is associated with Daewoo Trax ‘2017 / Ssangyong / N300. Ask the workshop for VIN, mounting-area images and the old component when no OEM reference is available. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The procurement contact should measure left or right installation position, measure clearance beside bumper and grille, and evaluate mounting tabs around the housing before the carton is allocated. This route applies to the tail light assembly version a shown for Daewoo Trax ‘2017 / Ssangyong / N300.

If images accompany the enquiry, include an original-label photograph, an upper-edge image, and an installation-opening picture. Label the evidence with the vehicle designation Daewoo Trax ‘2017 / Ssangyong / N300 so the workshop and purchasing team review one configuration.

The procurement contact can begin with original-label photograph to measure left or right installation position. A second image should show lens profile and outer edge from upper-edge image. Before the carton is allocated, measure mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Trax ‘2017 / Ssangyong / N300 vehicle record.

The parts coordinator should assess lens profile and outer edge from an installation-opening picture, then compare lens profile and outer edge before the installation begins. The maintenance supervisor should record lens profile and outer edge from a fixing-point close-up, then photograph lens profile and outer edge before the quotation is approved. A body-shop buyer should inspect electrical plug and pin layout from a vehicle-side photograph, then record clearance beside bumper and grille before the repair schedule is finalized. The stock controller should document mounting tabs around the housing from a fixing-point close-up, then note clearance beside bumper and grille before the installation begins.

Identification Summary

Transfer reusable hardware only after checking that every retainer matches the replacement openings. Recorded packing is 79 × 51 × 43CM / 10PCS; reconfirm current packing when freight is quoted.

Procurement Checklist

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What vehicle information should be checked first?

The listing covers Daewoo Trax ‘2017 / Ssangyong / N300. Because configurations may vary, check the actual installation area before approving the tail light assembly version a.

What should be compared with the removed component?

Photograph left or right installation position and the mounting area around lens profile and outer edge. Combine those images with vehicle identification data for review.

How can a trade buyer request pricing?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. The supplier can then review the product version, carton requirements and delivery options.