Rear Bumper Version A for Daewoo Captiva ’07 / Captiva ’12

Rear Bumper Version A for Daewoo Captiva ’07 / Captiva ’12: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Vehicle Confirmation

This rear bumper version a is associated with Daewoo Captiva ’07 / Captiva ’12. Ask the workshop for VIN, mounting-area images and the old component when no OEM reference is available. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Commercial Request Details

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The procurement contact should photograph upper edge alignment below the lamps, assess overall corner curvature, and confirm side-retainer engagement before the purchase order is issued. This route applies to the rear bumper version a shown for Daewoo Captiva ’07 / Captiva ’12.

If images accompany the enquiry, include a side-profile photograph, a straight-on view, and a fastener detail. Label the evidence with the vehicle designation Daewoo Captiva ’07 / Captiva ’12 so the workshop and purchasing team review one configuration.

The procurement contact can begin with side-profile photograph to photograph upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from straight-on view. Before the purchase order is issued, assess side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Captiva ’07 / Captiva ’12 vehicle record.

The installation team should evaluate lamp or grille openings from a connector close-up, then cross-check side-retainer engagement before the purchase order is issued. The importing distributor should evaluate side-retainer engagement from an adjacent-panel image, then compare bracket and bolt-hole spacing before the vehicle is dismantled. The service adviser should cross-check upper edge alignment below the lamps from a fixing-point close-up, then confirm side-retainer engagement before the commercial request is submitted. The procurement contact should cross-check lamp or grille openings from a rear mounting view, then note side-retainer engagement before the purchase order is issued.

Purchase Preparation

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Identification Summary

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

How should the model application be interpreted?

This rear bumper version a is listed for Daewoo Captiva ’07 / Captiva ’12. Use that designation as a starting point and verify the vehicle configuration before ordering.

What evidence is useful for a fitment review?

Check upper edge alignment below the lamps, confirm bracket and bolt-hole spacing, and retain the removed part until the replacement has been compared side by side.

Which details help prepare shipping terms?

A complete sourcing request names the quantity, delivery market and the comparison information used. Packing and freight can be discussed after the component version has been identified.