Front Bumper Board for Daewoo Captiva ’07 / Captiva ’12

Front Bumper Board for Daewoo Captiva ’07 / Captiva ’12: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This front bumper board is associated with Daewoo Captiva ’07 / Captiva ’12. No OEM number is stated, so identification should rely on the vehicle record, photograph and mounting layout. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The stock controller should compare side-retainer engagement, review upper edge alignment below the lamps, and review lamp or grille openings before the delivery plan is confirmed. This route applies to the front bumper board shown for Daewoo Captiva ’07 / Captiva ’12.

If images accompany the enquiry, include a chassis-plate image, an underside image, and a chassis-plate image. Label the evidence with the vehicle designation Daewoo Captiva ’07 / Captiva ’12 so the workshop and purchasing team review one configuration.

The stock controller can begin with chassis-plate image to compare side-retainer engagement. A second image should show overall corner curvature from underside image. Before the delivery plan is confirmed, review lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Captiva ’07 / Captiva ’12 vehicle record.

The maintenance supervisor should note upper edge alignment below the lamps from a removed-part overview, then assess lamp or grille openings before the purchase order is issued. The installation team should note lamp or grille openings from a removed-part overview, then record side-retainer engagement before the installation begins. The repair planner should align side-retainer engagement from a full component outline, then photograph upper edge alignment below the lamps before the stock request is released. The procurement contact should assess upper edge alignment below the lamps from an installation-opening picture, then note upper edge alignment below the lamps before the shipment is booked.

Inspection Route

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.

Technical Comparison Notes

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What is the listed vehicle application?

This front bumper board is listed for Daewoo Captiva ’07 / Captiva ’12. Use that designation as a starting point and verify the vehicle configuration before ordering.

How should fitment be checked before ordering?

Use the old component to check side-retainer engagement and overall corner curvature. Also state the installation side or position in the enquiry.

How can a trade buyer request pricing?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. The supplier can then review the product version, carton requirements and delivery options.