96626973 / 96626974 Headlight Assembly Version A for Daewoo Captiva ’07 / Captiva ’12

Headlight Assembly Version A for Daewoo Captiva ’07 / Captiva ’12: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the lighting inspection group.

Product Specifications

Ordering Information

This headlight assembly version a is associated with Daewoo Captiva ’07 / Captiva ’12. Use 96626973 / 96626974 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The stock controller should align left or right installation position, document clearance beside bumper and grille, and align mounting tabs around the housing before the replacement is test-positioned. This route applies to the headlight assembly version a shown for Daewoo Captiva ’07 / Captiva ’12.

If images accompany the enquiry, include an installation-opening picture, an adjacent-panel image, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with installation-opening picture to align left or right installation position. A second image should show lens profile and outer edge from adjacent-panel image. Before the replacement is test-positioned, document mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Captiva ’07 / Captiva ’12 vehicle record.

The repair planner should inspect electrical plug and pin layout from a side-profile photograph, then compare electrical plug and pin layout before the fitment decision is signed off. A vehicle inspector should evaluate mounting tabs around the housing from a full component outline, then photograph electrical plug and pin layout before the vehicle is dismantled. A vehicle inspector should verify electrical plug and pin layout from a removed-part overview, then assess clearance beside bumper and grille before the stock request is released. A vehicle inspector should align left or right installation position from a rear mounting view, then capture left or right installation position before the carton is allocated.

Repair Planning Notes

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Installation Planning

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What vehicle information should be checked first?

The stated vehicle is Daewoo Captiva ’07 / Captiva ’12. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How can an incorrect order be avoided?

The practical checks are left or right installation position, lens profile and outer edge and the surrounding clearance. Avoid choosing the item from the model name alone.

How should a wholesale request be submitted?

Send the order volume and destination together with VIN or chassis information where available. This information helps separate technical confirmation from the later shipping calculation.