92101090 Old Style Rear Bumper Version A for Daewoo Sail ’00 / Corsa / Agile ’09-’13

Rear Bumper(Old Style) for Daewoo Sail ’00 / Corsa / Agile ’09-’13: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Fitment Evidence

This old style rear bumper version a is associated with Daewoo Sail ’00 / Corsa / Agile ’09-’13. The references 92101090 support identification but do not replace a physical comparison. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The parts coordinator should inspect upper edge alignment below the lamps, assess overall corner curvature, and compare side-retainer engagement before the purchase order is issued. This route applies to the old style rear bumper version a shown for Daewoo Sail ’00 / Corsa / Agile ’09-’13.

If images accompany the enquiry, include a removed-part overview, an underside image, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with removed-part overview to inspect upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from underside image. Before the purchase order is issued, assess side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Sail ’00 / Corsa / Agile ’09-’13 vehicle record.

The parts coordinator should align side-retainer engagement from a corner-profile view, then inspect side-retainer engagement before the delivery plan is confirmed. The stock controller should assess side-retainer engagement from a connector close-up, then trace upper edge alignment below the lamps before the purchase order is issued. A body-shop buyer should document upper edge alignment below the lamps from an adjacent-panel image, then verify upper edge alignment below the lamps before the fitment decision is signed off. The procurement contact should capture overall corner curvature from a side-profile photograph, then inspect upper edge alignment below the lamps before the stock request is released.

Supply Enquiry Details

Installation should follow the vehicle repair manual and use serviceable original-style fasteners. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which Hyundai model does this page cover?

This old style rear bumper version a is listed for Daewoo Sail ’00 / Corsa / Agile ’09-’13. Use that designation as a starting point and verify the vehicle configuration before ordering.

How can an incorrect order be avoided?

Fitment evidence should show upper edge alignment below the lamps, bracket and bolt-hole spacing and the position where the component will be installed.

How can a trade buyer request pricing?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.